ORMUS

Home

## The Magic and Mystery of ORMUS Elements, Original article found in NEXUS MAGAZINE, Volume 14, Number 2 (February – March 2007) http://www.nexusmagazine.com/articles/Ormus.html

A concentrate of special elements abundant in sea water has exciting potential in improving the soil, increasing crop yields, assisting human and animal health, and even in combatting climate change.

A POSSIBLE NEW STATE OF MATTER WITH PROMISE FOR AGRICULTURE AND HEALTH

… The basic fact seems now beyond doubt, both from Hudson’s work and that of the independent group, that a number of precious (and some not so precious) metals, including rhodium, iridium, gold, platinum, palladium, copper and several others, can exist in a completely different state, in which they are not metallic, being grey or white powders when isolated in the solid state.

… He said that, in the ORMUS form of these elements, the electrons are re-arranged in such a way that they no longer participate in chemical reactions. Likewise, the bonds which normally hold metal atoms together in the solid form are lacking, so that they would be effectively monatomic. Because of this, he originally named them Orbitally Re-arranged Monatomic Elements, or ORMEs. More recent work now suggests that at least some of these may be diatomic, and also that very loose bonds can exist with certain other elements, particularly alkaline metals. Hence the generic name has been changed to ORMUS. They are also frequently referred to as the M-state of these elements.

… Another, and still more radical, claim is that the electron re-arrangement involved the formation of Cooper pairs, so that they can be (or can become with certain treatments) superconductive at normal temperatures. In support of this, Barry Carter has posted a short video file showing a grey powder jumping away from a magnet. It can be argued, however, that this “grain-hopping” phenomenon does not, of itself, prove superconductivity.

… For example, on drying an aqueous preparation of ORMUS rhodium on filter paper in sunlight, Hudson observed it to disappear with an intense flash of light, but with no sound or shock wave. Still more strange, when working with ORMUS iridium and subjecting it to repeated heating to red heat and cooling, he found its weight to oscillate violently with each cycle of annealing–even, at one point, to lose and then regain all of its weight. This result has been incorporated into the hyperdimensional theory of Finnish theoretical physicist Matti Pitkanen.4

… another strange phenomenon: drops of liquid, containing concentrated ORMUS, forming on the outside of closed containers, especially under the influence of magnetic fields. This has led them to suppose that ORMUS atoms can pass through the walls by quantum tunnelling, and carry a little water with them. Also unexplained is the observation that certain ORMUS preparations in aqueous solution acquire a static electric charge. This can be discharged with an audible spark, after which the charge will re-form and can again be discharged an indefinite number of times.

… Hudson then gave samples to a number of doctors, with the suggestion that they try ORMUS on a few of their terminal patients. In his talks, he gives graphic reports of some of the remarkable recoveries which occurred. He also mentions that he gave a sample of ORMUS rhodium to a number of laboratories, including Merck & Co. and the US National Cancer Institute, which tested it on cultures of cancer cells and found it not to be toxic to these cells.

… Nevertheless, a few reports can be found from within the forums of ORMUS-attributed recoveries from serious illnesses including cancer.

… Here I report my own experience. I had been taking a proprietary preparation of ORMUS for about one year, and had been aware of increased energy and a feeling of “well-being”. For the test, I used the GDV (gas discharge visualisation) equipment designed by Dr Korotkov ….

… In view of the difficulties in obtaining scientific data on human health, most of the emphasis must go to the effects on plants. These are unarguable, and are indeed phenomenal. They can be seen on several websites.13
The preparation most used is the simplest and cheapest: a crude concentrate made from sea water. There is in fact a history, prior to the discovery of ORMUS, of the use of products from the sea, particularly seaweed, in agriculture. Some people have even reported good results from putting unaltered seawater on the land.

… The procedure to concentrate ORMUS, however, probably increases its ratio to salt about 80 times.
… Very little of the concentrate is required: from four to 20 litres per acre [~0.405 hectare], depending on the crop. The results of using ORMUS concentrate, however, far outstrip those with sea water. Indeed, without the photographic evidence, they would be hard to believe. For example, a walnut tree treated over several years has grown to over twice the height of control trees and now produces six times the weight of nuts, and the nuts themselves are the size of tangerine oranges! A plum tree produced, in the first year of treatment, individual fruit nearly twice the weight of those from the control tree, and in the second year they were over five times the weight. One photograph shows maize plants so high that the owner has to stand on a stepladder to reach the top. They appear to be some 12 feet [~3.6 metres] high. Oranges were produced the size of canteloupe melons!


Editor’s Note:
For background information on ORMEs, see David Hudson’s two-part article “White Powder Gold: A Miracle of Modern Alchemy” in NEXUS vol. 3, nos 5 and 6; and Laurence Gardner’s three-part article “Star Fire: The Gold of the Gods” http://www.nexusmagazine.com/articles/starfire1.html in NEXUS vol. 5, no. 6 and vol. 6, nos 1 and 2, as well as “Lost Secrets of the Sacred Ark” http://www.nexusmagazine.com/articles/lostark.html in NEXUS vol. 10, no. 2.

(to link the article above use: #ORMNEX)

## ORMUS – What is it? An overview, by Barry Carter, http://www.subtleenergies.com/ormus/tw/overview.htm

In the late 1970s an Arizona farmer named David Hudson noticed some very strange materials as he was doing some gold mining on his land.Hudson spent several million dollars over the following decade figuring out how to obtain and work with these strange materials. In 1989 David Hudson was granted patents on these materials and methods for obtaining them.(1)

Other researchers were also making similar discoveries around this same time but Hudson was the first to get information out to the public about his discoveries. During the early 1990s Hudson toured the United States giving lectures and workshops about what he had found. Transcripts of portions of three of David Hudson’s lectures are available on the Web. The most complete of these transcripts is the transcript of his Dallas lecture and workshop.(2)

The materials that David Hudson discovered appear to be related to the things I listed in the first paragraph of this article and to concepts of modern physics like superconductivity, quantum coherence and Bose-Einstein condensates.

These materials have been called ORMEs, monoatomic gold, white gold, white powder gold, ORMUS, m-state, AuM, microclusters, and manna. David Hudson calls the materials he found Orbitally Rearranged Monoatomic Elements or ORMEs.He also refers to them as monoatomic elements in a high-spin state.

The ORMUS or m-state materials are thought to be the precious metal elements in a different atomic state.The following elements have been identified in this different state of matter (these elements, with the exception of mercury, are listed in Hudson’s patents):

KNOWN ORMUS ELEMENTS : Element followed by its Atomic Number
Cobalt 27 ; Nickel 28 ; Copper 29 ; Ruthenium 44 ; Rhodium 45 ; Palladium 46 ; Silver 47 ; Osmium 76 ; Iridium 77 ; Platinum 78 ; Gold 79 ; Mercury 80

All of these m-state elements are quite abundant in seawater. They also seem to be present in most rock, fresh water and in the air. According to David Hudson’s research, these elements in their m-state may be as much as 10,000 times more abundant than their metallic counterparts.There also may be other elements that occur naturally in the m-state.

Various researchers, working independently, have identified these materials in this different state of matter.They have arrived at many of the same observations. These m-state elements have been observed to exhibit the quantum physical behaviors of superconductivity, superfluidity, Josephson tunneling and magnetic levitation.It looks like these are an entirely new class of materials.

These m-state elements are also present in many biological systems. We believe that they may enhance energy flow along the acupuncture meridians and in the microtubules inside every living cell.(3)

It appears that this state of certain of these elements has been known throughout history.Several of the procedures for extracting or making ORMUS have been adapted from ancient alchemical texts.We believe that the Philosopher’s Stone and the Biblical manna may be variations on this state of matter.(4)

Some recommended alchemical texts related to the Philosopher’s Stone are “Sacred Science” by R.A. Schwaller De Lubicz and “Le Mystere des Cathedrales” by Fulcanelli. Another source is “Occult Chemistry” by Leadbeater and Besant. The premier treatise on the subject may be “The Secret Book” by Artephius(5)

There is evidence that the m-state elements are associated with the ‘dark matter’ that astronomers look for in space, the Earth’s magnetic field, healthy soil, weather phenomena like lightning and that they are essential minerals for all life on Earth.(6) Certain properties of the m-state materials seem to be related to consciousness itself.(7)

A number of methods for obtaining the ORMUS elements have been devised in the last several years. The easiest of these methods is to raise the pH of clean ocean water to 10.78 and no higher, using lye water, then wash the resulting precipitate three times with distilled water.(8)

It is my firm belief that, once it becomes widely known, the discovery of the ORMUS materials will be heralded as the greatest scientific discovery in human history.

– (1) Hudson’s patents can be found on the World Wide Web at: http://www.subtleenergies.com/ormus/patents/patents.htm
– (2) You can find several transcripts of Hudson’s lectures on the Web at: http://www.subtleenergies.com/ormus/presentations/present.htm
– (3) A list of living sources for these materials can be found on the Web at: http://www.subtleenergies.com/ormus/health/sources.htm
– (4) Some possible historic references can be found on the Web at: http://www.subtleenergies.com/ormus/historical/historic.htm
– (5) “The Secret Book” by Artephius is available on the Web at: http://www.subtleenergies.com/ormus/historical/artephis.htm
– (6) An illustration of the effect of the m-state elements on the growth of walnuts and walnut trees can be found on the web at: http://www.subtleenergies.com/ormus/tw/walnuts.htm
– (7) ORMUS and Consciousness http://members.aol.com/yggdras/paraphysics/BCarter.htm
– (8) ORMUS – How to make it: http://www.subtleenergies.com/ormus/ormus/ormus2.htm
– (9) You can find instructions for joining these email lists and workgroups at the bottom of the following Web page: http://www.subtleenergies.com/ormus/faq.htm
– Most of these references are linked from the following web page: http://www.subtleenergies.com/ormus/tw/articles.htm
Barry Carter can be emailed at: bcarter@igc.org or phoned at 541-523-3357.

(to link the article above use: #ORMWHAT)

## Electric ORMUS, by Barry Carter, http://www.subtleenergies.com/ormus/tw/ElectricORMUS.htm

Several people have noticed and commented on various electrical phenomena in their work with the ORMUS materials.

Gary Y. described his experience as follows:
Just had to share this with everyone and ask if anybody had experienced the same. Got our first bottle of ORMES Friday, Mountain Manna C-50 http://www.mountain-manna.com/ . I was very excited and tore right into it. It was contained in a plastic bottle wrapped in aluminum foil with a little aluminum lined safety skin over the mouth.

Holding the bottle in my right hand, I reached to pluck off the safety skin with my left and as soon as I touched it ZAAP!. The discharge sounded like a 22 pistol!

… I had the same thing happen once when opening a bottle of Liquid Chi http://www.liquid-chi.com/ . As I pulled off the inner seal, a spark jumped about an inch to my finger with an audible snap. Arthur, who makes the Liquid Chi, says that this is a fairly common phenomenon for him.

These types of electrical phenomena appear to be intimately connected with the ORMUS materials. Perhaps the ORMUS, when sufficiently charged, is reaching the saturation point of the superconductive Meissner effect. This discharges into the water and sparks when the container is opened. The foil wrapped container would serve as an orgone accumulator which would concentrate energy in the ORMUS materials.

I first heard of this kind of effectin 1989 when my friend Jim had his mining accident. Here are some excerpts from this story which can be found at: http://www.subtleenergies.com/ormus/tw/mystory.htm

Early on they figured out that when they ran this process they were getting a lot of extra electricity, a lot of extra electricity! And they kept burning these ground wires out until finally they got one the size of a finger. I mean a LOT of electricity was being generated by this system and they couldn’t figure out where it was coming from.

Now, remember all the electricity, the lead and the arsenic and everything else. As soon as Jim grabbed the fitting to tighten it he got shocked and felt like had been poisoned. He fell to the ground vomited, and he just felt awful. He saw color, he tasted metal, he saw lights and got sick. Here are more comments from the interview with Jim:
“It was a dull electrical shock, but often, like tscht & tscht .. tscht. But not all that gnarly. Little ones, dull.”

Jim experienced a lot of electrical effects following his exposure to the ozonated mine wastewater. Whenever Jim would take a shower it would be like electrical sparks hitting his skin, every drop would deliver an electric shock to him and it wasn’t just a little electric shock, it was literally almost audible shocks.

DM:So, did this just happen once or twice or continually like day after day did you get this effect where . . . ?
Jim:I had that effect for five months afterwards.

Jim:Yea, I mean it was real bad. In fact, I could generate a huge amount of static electricity by taking an article of clothing that I wore and have right near but not in contact with the shower head stream and it would charge the droplets to the point where they were making [neon] just tscht, tscht, tscht, tscht.

Whenever he would pee, electrical sparks would jump between his toes and the bolts on the bottom of the toilet, with the obvious return flow (which was not pleasant either). Whenever he was taking a shower he would notice that windows and doors would blow open and shut, like winds (he called them ionic winds) would happen in the room, blowing things around.

“The ionic wind is what I called it for lack of a better word. Cause primarily it was something that was first noted by K and Tracy at their house in that they had a shower door that was real funky and a bathroom door that didn’t latch very well. And when he’d shower off after working with this gold stuff, literally the wind would open up the bathroom door. Like blow it open type stuff. There was a great deal of air movement to it. Especially like shocks when you washed your hair or whatever.”

From these electrical experiences Jim concluded that the substance he got in his hands was some sort of electric generator so he fabricated a device to measure the electric fields:
Jim:It was highly charged. I built a little FET charge meter in my last days so I could see the polymer stuff flowing around because it would have enough of a charge that it would effect an FET meter. Like dead deflection.
DM:Field Effect Transistor?
Jim:Yea. It’s like what you use to measure static electricity by its field. Same type thing, exactly. I just built a dollar ninety-eight one with stuff from Wacky Willie’s and called it good. Never calibrated it or anything. But it was very . . .
“I slept a lot and, how would you say in English, this polymer stuff was driving me batty. It was a huge irritant to me. I mean there was times at night there would be so much static electricity when I would lie in bed and stuff, I couldn’t sleep. I’d just lay there and tscht, tscht, tscht, tscht, tscht, tscht, there would be sparks going and all that other stuff.”

… As Whitegold is a superconductor with a Meissner field
An unusual characteristic of Meissner fields is that another Meissner field, which oscillates at the same frequency, can enter that field of the first and not perturb it. Each week the High Priests of Melchizedek ventured beyond the veil in the Holy of Holies. There they partook of the Bread of the Presence of God.

… In Lost Secrets of the Sacred Ark, Laurence Gardner describes similar effects from the Ark of the Covenant (which would be a capacitor and an orgone accumulator if it was constructed as described in the Bible):

I think that the balls of light from the orchid cactus may also be related to this. You can read about them at: http://www.subtleenergies.com/ormus/tw/orchidcactus.htm

(to link the article above use: #ORMELEC)

## ORMUS! Written by: Len Foley – Rated 3.84 out of 5, 253 people have rated it. http://www.thebestdayever.com/articles.php?a=read&aid=100

At first glance, this photo may be a bit difficult to comprehend, but what happened was this:

Last week, Dave was inspecting his ormus-fed plants in his lab and accidentally walked through a Black Widow Spider “web strand” – a strand that, oddly enough, had spun to the floor (which is something Black Widow spiders seldom do). Dave said: “This spider lived off insects that lived off these plants. This spider web strand is filled with ormus.”

I said: “How do you know that?” Dave said: “Look!” And we both stood in front of this ordinary spider web and watched as it floated and danced before our eyes. “One of the properties of ormus,” Dave said, “Is that it floats!”

Now you might be saying: “Big deal, if you blow on a spider web, it moves around – I’m not impressed.” But there are factors involving this incident that are worth mentioning:

1. This strand was floating and dancing IN PLACE for over 17 minutes! (It could have gone longer, but we decided to set it inside Dave’s lab, where it belonged).
2. There were no air-currents anywhere in the room. The air surrounding us was perfectly still.
3. The strand looked like an ordinary spider web strand, but behaved like smoke (wispy, tendril-like, and CREEPY)!
4. The strand was attached to a small stick (that Dave was holding), the other end was completely untouched.
5. The strand responded to human contact (either being repelled or drawn by the proximity of one’s finger) – But it DID NOT respond as an electromagnetic response… that is, it didn’t respond in a stimulus-response – predictable way. The strand appeared to respond in odd (almost consciously playful) ways!
6. This incident was witnessed by 3 other people besides myself – so I know this effect wasn’t from drinking too much fermented Noni Juice with Dave!
7. Everything Dave has ever said about ormus corresponded with the spectacle before our eyes.

NOTE: We took over 10 pictures with Dave’s digital camera. Some were better angles, but the picture we chose gave the best overall image of the actual strand. As always, my visit to David’s private lab produced many unusual experiences. Perhaps we will do a video documentary on some of the things Dave’s currently developing! For more glimpses of David Wolfe’s amazing discoveries, click: https://www.thebestdayever.com/photos.php?a=cat&cid=3

==> And again, the significance of the “ice-ormus” is a bit difficult to convey through a photograph. But imagine pouring a glass of water, and then watching (amazed) as the water reaches out of the glass and touches your hand. Then imagine as the water spreads over your table and forms itself into glittering crystals before your eyes. That, in a nutshell, is what happened in these photos. Dave’s freezer was so filled with glittering ormus-crystals that he couldn’t keep the door shut!

(to link the article above use: #ORMWIRE)


‘Ormus in Japan’ picture found in an ORMUS forum

## Chloride Method, for healing, the clear chloride form seems to work better. http://www.subtleenergies.com/ormus/ormus/ormus4.htm

This is a method for producing a dissolved chloride form from the white precipitate generated by the various production methods mentioned in the ORMUS document.Though the precipitate form works for healing, the clear chloride form seems to work better.

Once you get the washed precipitate, take the pH down till all of the precipitate re-dissolves.Since this will be at quite a low pH (may be less than 1.0) you will then need to bring the pH back up by slowly adding a one molar solution of sodium hydroxide over a 24 hour period till you get back up around pH 3.

A molar solution of any material is the molecular weight of the material numerically expressed in grams per liter of solution.For sodium hydroxide (NaOH) the atomic weights of the elements add up to 40. Therefore you weigh up 40 grams and dilute it with water to make one liter. Approximately two teaspoons of granulated NaOH in nine (9) ounces of distilled water.

As you get close to pH 3 you may wish to go to a tenth molar solution.You will need a calibrated pH meter to do this since the pH should be brought as close to 3 as possible without going over.The pH should remain stable at 3 for at least 3 hours.The key here is to keep the solution free of any precipitate.If precipitate forms, you have moved the pH up too far or too fast.

This preparation is taken at the rate of one teaspoon mixed in a glass of distilled water, twice a day.If the water you use is not distilled some of the m-state may precipitate out on contact with it.

This clear solution has the m-state elements in a chloride form rather than the hydroxide form of the precipitate.It is believed that the body must convert to the chloride form in order to easily assimilate the m-state elements.Since stomach acid is around pH 4 this is not sufficiently acid to completely re-dissolve the m-state precipitate.

Question:Is it necessary to bring the pH up so precisely; this is quite a sophisticated step.I don’t have the necessary equipment to ensure such a slow, precise raising of the pH. Might this be a little faster and still work?
Answer:It must be done precisely but the person who developed this technique does it by hand, a little bit at a time over a 24 hour period.The sodium hydroxide must be added while stirring vigorously in order to avoid creating local areas of high pH.An accurate pH meter is required.

Question:Is it possibly equivalent to add enough NaOH to bring the pH up to 3 and then let that settle for 24 hours or more?
Answer:The only reason to bring the pH up to 3 is that it can be safely ingested at that pH with the dilution that was suggested.A slightly lower pH with a higher dilution would also work.

(to link the article above use: #ORMCHLO)

## ORMUS and Ozone, by Barry Carter http://www.subtleenergies.com/ormus/tw/ozone.htm

Extracts :

… This was the first and only ozone generator that the Bureau of Mines ever tested which could do this…. At my prompting my inventor friend decided to clean up a mine waste pool in our area.

… If this snotty material was left to dry in the dark, it would become a powder which would “fly” away if you tried to touch it. If it was dried in sunlight, it would disappear in a flash of light as soon as it became dry.

… We have found that these materials have an affinity for oxygen and water. David Hudson postulates that this affinity is due to a common resonance frequency between these materials.

… “This little zero point frequency I showed you between the positron and the electron; if you follow that right up the electromagnetic spectrum, it agrees with the molecular frequency of hydrogen dioxide, or water. So there is an affinity for this material and water. That’s why it is normally taken in water. When you come to understand that your body is, in fact, mainly water. That, literally, this material when you distill water it distills with the water as the oridide, the iridide, the ruthidide, just like chlorine.
And so if you distill water thinking you are getting high purity water, it goes with the water. And it literally changes the bond angles of the water. That one iridium atom controls 56 waters of hydration around itself. And all the bond angles of all 56 waters are altered when iridium is present. I haven’t carefully studied the research work of people working with water but I strongly suspect that their water isn’t completely pure and they are finding that the bond angles can be changed. There is something else besides H2O in the water.”

Ultra-pure water made from pure hydrogen burned in pure oxygen does not behave anything like the water we know. The ORMUS elements effect the viscosity, boiling point, freezing point and surface tension of water.

… We believe that our ozone generator is producing significant amounts of O6 or diozone. It looks like this diozone can be used as a “leash” to capture and manipulate the ORMUS atoms. Here is a bit more background information on this concept.

… What differentiates this form of matter from “ordinary” matter is that the ORMUS elements are in a high spin state. This means that the atoms are spinning more rapidly than ordinary atoms. This high spin pulls the electron cloud in toward the nucleus of the atom, sort of like an ice skater pulling her arms in to increase the rate of her spin.

… For example, the m-state rhodium gives water a sticky feel. This is also true of the metallic form–rhodium hydroxide.

… Because these elements hold on to their electrons so tightly the ordinary spectrographic methods of identifying them simply don’t work.

… I believe that they should be suspected to be present in any chemical compound which cannot be synthesized. Chlorophyll would be an example of this type of compound. I understand that the “secret” ingredient in chlorophyll is the ORMUS form of copper.

… If you have an ORME diatom which is partially paired this will leave some electrons available for conventional electron bonding with other elements. This ORME diatom will then have one foot in the ORMUS world and one foot in the metal world.

… The sodium atoms provided with the lye appear to form a three atom cluster or a triangle. We believe that this triangular molecule provides a nice tight comfy inner space for the ORME to hide in. Similar ring molecules made of carbon, oxygen and chlorine have also been used to trap and chemically manipulate the ORMUS elements. The oxygen ring molecule is the diozone molecule.

… Though you cannot get an electron handle on the ORMUS elements, if you get them in a diozone “box” you can use the electron handles provided by the diozone to put them where you want them. Once you get them where you want them you must remove the diozone ring in such a way as to leave the ORMUS atom intact and functional, but that is another story.

… The highly dipolar nature of this complex is what lies behind, and is responsible for, the magnetic properties of ozonated ORMEs (or ORMEs di-ozonides) and their salts. There are a number of variations to the structure I’ve just described. For example, the O6 group acquires hydrogen ions to form hydroxyl groups (similar to those of copper hydroxide, described earlier) when in water.

… The propensity for the an ozone-gold complex to deposit gold on carbon, and its attraction to hydrocarbons such as grease and gasoline, is nothing more than an expression of the disposition of these materials to oxidize, and the affinity of the O6 in such an ORMEs complex for them. The appetite of the O6 is hardly satiated by the gold dumbbell, and it is eager to find something else more reactive to bond to.

… Dissolution in acids may occur with partial ORMEs; a sample may be *nothing but* partial ORMEs and still completely dissolve in acid. Whether partials will dissolve in acids depends on the particular element involved, the degree of partiality, and the energy flowing through the paired valence circuits. You and Hudson presently lack means of quantitatively determining either of these last two parameters. You can use acid to eliminate partial content from your samples. But there are other considerations. Acids may also react with the oxygens in ORMEs-di-ozonides, with deleterious consequences, as explained in a moment.

… We believe that there are many useful interactions between oxygen and the ORMUS elements in the body. We suspect that hemoglobin is partially composed of ORMUS rhodium and that an increased availability of ORMUS rhodium in the body will facilitate oxygen transport. I have personally noticed this in that when I am supplementing ORMUS rhodium in my diet, I have significantly greater ability to exercise without becoming winded.

… Apparently, anti-gravity like effects have recently been measured emitting above and below the spin axis of Bose-Einstein condensates in spin coherence. See: http://popularmechanics.com/science/research/1999/10/taming_gravity/
This anti-gravity like force was discovered by Dr. Ning Li who calls it “AC Gravity”. I suspect it may also be related to the spin fields (scalar waves) that Alexandr Shpilman has associated with the ORMUS elements.

(to link the article above use: #ORMOZ)

## Transmutation and Radiation, by Barry Carter http://www.subtleenergies.com/ormus/tw/Radiatio.htm

Several transmutation and radiation effects have been reported which relate to the ORMUS materials. Hudson and other researchers report that the m-state elements, particularly m-state rhodium will disappear in a flash of light if left in sunshine. In his Portland lecture, Hudson said:
“So we precipitated this material out of the black and we took the material and dried it. In the drying process we took a large porcelain funnel called a Buchner funnel about this big. It had a filter paper on it. This material was about a quarter of an inch thick on top of the filter paper. At that time I didn’t have a drying furnace or a drying oven so I just set it out in the Arizona sunshine which was about 115 degrees at 5% humidity so it really dried fast.

What happened was that after the material dried it exploded. It exploded like no explosion I had ever seen in my life and I’ve worked with a lot of explosive materials. There was no explosion and there was no implosion. It was as if somebody had detonated about fifty thousand flash bulbs all at one time just poof. All the material was gone, the filter paper was gone and the funnel was cracked. So I took a brand new pencil that had never been sharpened and stood it on end next to the funnel and started drying another sample. When the material detonated it burned the pencil about 30% in two but did not knock the pencil over and all the sample was gone. So this was not an explosion and was not an implosion. It was like a tremendous release of light.
It was like you set that pencil beside a fire place and after about 20 minutes you saw it was smoking on one side and burning in two. That’s what the pencil looked like immediately after the flash. Now this just had me baffled. What ever this stuff is it’s wild. We found that if we dried it out of the sunlight it didn’t explode but if we dried it in the sunlight it exploded.”

# Another researcher reported a similar effect, but not in sunlight:
“I was going to dry some of this stuff inside of a heater, a wire wound resistor. And I was going to dry it. It stayed in there just fine until it got dry and then it went poof, and a big flash and that’s how I got the first metal flake paint job.” It appears that this property of these materials is related to their absorption of energy, rather than the exposure to light, per se.

# A third investigator definitely links the flash of light disappearance to the m-state rhodium:
“When you dry rhodium in the sunlight it goes off like a million flash bulbs. No explosion, no implosion, just a brilliant flash of light and it’s done. The Pharaoh in Egypt used to commit suicide this way. When they were ready to meet their God they would dope up real heavy on the rhodium and walk up this long hallway into the morning sunlight. They would last about ten minutes. And they would blink out of existence. Gone in a flash of light. This is a massive overdose. You couldn’t afford to get this amount of rhodium unless you owned a rhodium mine.”

# The best theory I have seen proposed to account for the disappearing in a flash of light phenomenon is as follows. When energy is added to the superconducting ORMUS system it is stored within that system. Superconducting systems can store a great amount of energy but their energy storage capacity is finite. The point at which energy storage capacity is full is called Hc2. When the energy storage capacity of a superconductor is saturated any more energy put into the system will cause the system to become unstable. It appears that when energy is added via solar radiation or via electromagnetic fields past the Hc2 saturation point the superconducting system breaks down and the ORMUS elements are converted to their metallic counterparts and to energy.

# In his Portland lecture Hudson relates another experiment where the break past Hc2 would have occurred much more rapidly:We purchased what is called an arc furnace. We took about thirty grams of this white powder and we put it in the furnace. This furnace had an insulated crucible; it had a copper crucible in it with water all around it to keep it cool. You bring a lid to set down on top of it and there’s a tungsten rod that hangs down in it. And it actually runs a little arc welder which you strike from the tungsten electrode to the copper. And in this arc you sit there and you stir with the electrode back and forth, back and forth till you literally melt everything that is there. Now what we did was we pumped out all of the air, we back filled it with helium gas, for a plasma gas, and we struck the arc.
It went bzzp, like that and shut off. We opened up the arc furnace, no tungsten electrode.Now this tungsten electrode is about the size of my thumb … The people who built this furnace said we could use it for thirty five to forty times with no deterioration of the electrode. We could burn it for minutes and minutes and minutes and minutes. We didn’t even get a second out of this thing. So we sent to the manufacturer, got another electrode put it back in it, put back on, closed it back up, vacuumed the air out, put in the inert gas, struck another arc, bzzp, shut off. Opened it up again and the tungsten electrode is all molten into this powder. What we found when we analyzed the powder after we did this, it wasn’t the same element it was before we did this. And what we also found is that there was an amplification of heat about two thousand times.

It was not chemical heat, it was nuclear heat. What we found is all the wiring in the laboratory was beginning to crumble and fall apart.You could go up to copper wires and do that and they would just go to powder. The glass beaker sitting in the laboratory near the furnace was getting full of little air pockets in the glass and when we would pick them up they would fall apart. And that’s radiation damage. There is no other explanation for it. I’ll show you tomorrow that Berkeley-Brookhaven has confirmed that this is 25,000 electron volt photons. Gamma level radiation comes out of these high spin atoms when you throw too much energy at them.
We postulate that these different effects occur depending on how rapidly the superconducting system breaks past the Hc2 point. It seems that industrial processes can be developed which take advantage of these different responses of the m-state materials.

# One researcher has reported that in the presence of a rapidly collapsing magnetic field it is possible to add or subtract nucleons in the m-state materials. This researcher claims that it is possible to convert the metallic elements to their m-states then change their atomic number with a collapsing magnetic field and convert the resulting m-state element back to a different metallic element. This researcher says:
“Palladium made from mercury is completely stable. Gold made from mercury is not stable. It goes through a “hot” period. Since you must step the mercury down to get to gold (you are starting with 206 mercury and you are dropping it to 197 gold) you must step it down through several transitions. You should try to bring the excess nucleons all out as an inert gas. If you don’t get them all out as an inert gas the material becomes radioactively hot and you will have a decay factor. During this decay process you can have neutron and beta emissions.”

# Carbon 14 formation
Hudson has also postulated that the ORMUS elements are related to the formation of carbon 14 in living things. In his Tampa lecture Hudson was asked “What did you mean when you said the hydrocarbons would poison the material?” He replied:
“I’ve found that there are four substances that pin these high spin atoms and take them back to the low spin state. Those substances are sulfites (SO3), carbon and carbon monoxide, nitric oxide, and short wavelength radiation (deep ultraviolet or shorter). That’s what caused this stuff to explode in sunlight, I found out later. So there are four major things which cause this to go back to the low spin state. So, actually, in your body there are four things which cause this to go back to the low spin state. So that in your body it kills the light. It causes them to go back to the low spin state.

I will say that when nitric oxide interreacts with these elements, taking them back to the low spin state, that it does involve a phenomenon called electron annihilation. And the actual nitric oxides instead of being nitrogen 14 becomes radioactive carbon 14 when that occurs. So that in your body, when dying you are producing radioactive carbon 14. It gets in your body a different way than they tell you it does.”

# One researcher reports that when the precious metals are converted to their m-state, using a high temperature sodium reaction, beta radiation is released.

# Gary’s comments on transmutation
Regarding cleanup of nuclear waste, there is a lot of good news in sight. I have been observing developments in CF research, since Pons and Fleischmann. Several researchers have reported wholesale transmutations occurring in these reactions. There have been numerous cases of radioactive substances displaying substantially reduced emissions, and even being rendered virtually non-radioactive. Besides the Cold Fusion work, there are several other areas, such as sono-luminescence, Brown’s gas, hydro-cavitation devices, and others, that are all showing transmutation effects.It seems that we are suddenly being bombarded by transmutations every time someone tries a new experiment these days.
I suggest that the ancient philosopher’s stone is an ORMEs-based material. When ORMEs visit the scientific world in the near future, they will shortly thereafter be found to be the grand-daddy of all transmuters. Metals, concrete, liquids, and gases -all the radioactive materials of atomic sites- (I suggest) shall all be healable of their atomic instability by this means. It is going to be an amazingly different world from that time on.

In the same way the energized ORMEs of your friend Jim were able to penetrate their container walls, the ORMEs of the philosopher’s stone likewise possess the ability to penetrate all forms of matter.
So I believe the ORMEs phenomena shall indeed provide means of effecting such stabilizing transmutations. In this regard, it does not particularly matter whether the actinides contain ORME-forming members, or not. There is far less reason to lose sleep worrying about a nuclear cleanup problem than there used to be. The almost-magical technology break-throughs that will make cleanup possible are finally beginning to come into view. It will even make your trees grow better.

(to link the article above use: #ORMTRANS)

## The Effects of Magnetic Water, By John V. Milewski http://www.subtleenergies.com/ormus/tw/magneticwater.htm

December 21 2003, About 4 months ago I started drinking what I call magnetic water as a means of energizing my body. After a month or so an unusual effect started to show up…He was processing his water for about 5 days and drinking 3 cups a day, while I was only processing it for 2 to 3 days. He reported to me that his hair was turning dark …Now after about 4 months his hair is about 95% dark in the back and about 80%, and in the sides and front and his beard about 50% dark.

Five day water is defined as water that remains in the magnetic activation apparatus for a minimum of 5 days…What is very unusual about these changes is that the whole hair changes at once from gray to black. It does not start at the roots and grow out but the whole length of the hair turns at once. You may have heard of stories about a person who experienced a terrible shock in their life and their hair turned white over night, well I believe that this magnetic water has the reverse effect, but at a much smaller amount and it takes months to see the effect but the positive effect is there and is real.

The apparatus for making this water is very simple. It consists of an empty new one gallon, in paint can, in which is placed an empty one liter soda bottle that has the top cut off at the level where it starts to get narrower. In the space between the inner wall of the paint can and the empty one liter container, magnetite is poured. This makes a cylinder of powdered magnetite about one and one half inches thick surrounding the one liter size hole in the center. Into this hole is placed a standard bottle of store bought spring water that is about 710 ml size (that’s a 3 cup volume of water). It fits in very nicely.

You make up a minimum of five of these units. Take one bottle out every day and drink the water.

What I think is happening is that the magnetite which is a strong magnetic suscepter is concentrating the earth’s magnetic fields into it’s cylindrical shape and the shape effect, in turn, sets up a magnetic spiral vortex in the core of the cylinder in which the water is stored. This in turn activates the water with the magnetic energy.

I think this is the activating force for change in our bodies toward regeneration, as we drink it, and the hair color restoration is the first sign of this happening. A second sign is that my fingernails are growing faster and stronger and my skin seems to be getting smother and softer, in spots, with less skin tags.
Bob S had to go to the dentist to have two molars crowned. He had been drinking the water for about two months before going to the dentist. The dentist told him that he was going to have to do two root canals at $475.00 each before he could do the crowns. When the dentist removed the old fillings he was surprised because he said that where the root was supposed to be, the molars had calcified! He couldn’t believe it! He said he had never seen anything like it. Bob S was really happy because he saved $950.00!

I HAVE MAGNETITE FOR SALE : $5 a pound at 50 pounds, $7 at 20 pounds, $10 at 10 pounds, $12 at 5 pounds. Plus shipping which is about $1 per pound (to be determined). J V. Milewski, 505-856-6259

(to link the article above use: #MAGWAT)

## [ORMUS] recipes using ormus?, message #18982, Oct 3, 2006, on ‘ORMUS’ Yahoogroup, by Jeff Williams, txaustin1@… http://tech.groups.yahoo.com/group/ORMUS/message/18982

Properly prepared Gold precipitate does have a somewhat sweetish taste all of its own… {most solutions prepared this way are fairly salty – but when the salt is removed the gold itself DOES take on a sweetish taste!}

With sea salt or earth extractions the issue is removing FIRST and FOREMOST, the salt — without removing the ORME elements… and SECOND AND MOST IMPORTANTLY dropping the pH down to about 7.5-8.0 before drying the material — this, when done properly, ALSO tends to take on a rather sweetish taste… it is a patience demanding extension of the standard “Wet Method”, but not too difficult really…

Anyone desirous of further information is welcome to email me offline.

I can send you a short summary of the steps to add to your normal wet method process to get the sweet resulting product, wet or dry.

I had even considered offering a wafer form product awhile back, but there has never been much of a demand for it… it would consist of an extraction product, properly prepared, held together with a binder material and formed into small single-dose sublingual wafer flats… {possibly enhanced with a natural essential oil flavoring blend}

BUT — I can see no reason properly prepared ORMUS powders couldn’t be used to supplement anything from cookies and cakes, to breads or crackers…

(to link the article above use: #PR5)

## Observed Properties , by Barry Carter http://www.subtleenergies.com/ormus/tw/Observed.htm

We use the terms m-state and ORMUS in preference to Hudson’s ORME terminology since ORME is an acronym for Orbitally Rearranged Monoatomic Elements and it is not entirely certain that any of these elements are monatomic.

# General Properties:

# Hudson’s quantities:
– Element || Oz./Ton || Percent of Total || Percent of Ton ||
– Rhodium || 1,200 || 50% || 5.00% ||
– Iridium || 800 || 33% || 3.33% ||
– Ruthenium || 250 || 10% || 1.04% ||
– Osmium || 150 || 6% | 0.63% ||
– Platinum || 13 || 1% || 0.05% ||
– Palladium || 5 || 0% || 0.02% ||
– Gold || 1 || 0% || 0.00% ||

= Total || 2,419 || 100% || 10.08% ||

# Elements don’t assay correctly: Various researchers have reported that these elements don’t assay as what they are, using spectroscopic or chemical assay methods.

# M-osmium battery: Two sources report that it is possible to make a very high energy capacity battery using m-state osmium. Since osmium is generally very toxic it may not be the best element to use in this situation. A similar high density battery has been reported using other materials.

# Methods for making or obtaining the m-state elements:
– Hudson’s patented method – Electrochemical method – Ozone method – Magnetic trap – HCl & H2O2 method – Sodium burn – Boiling in lye – Wet method – Dry method – Homeopathic method – Full Moon dew method – Extract from organics – Golden tree in sodium – Ancient mechanical method – HR method

# Can be transmuted using following methods:
– Collapsing magnetic field – Microwave oven – Solar UV – High heat – Chemical

# M-state liquids:
One colleague has developed a “magnetic levitation (ML) trap” to concentrate the ORMUS elements in water. This trap literally levitates the superconducting elements against gravity and against the flow of the water into a collector from which they are conducted into a storage container. This ORMUS water is then converted to metal for assay and sale.

The “water” from the trap is distinct from “normal” water from the same source in several ways:

# It is lighter than water: I have measured several samples of m-state water from a magnetic levitation trap and it is somewhat lighter than regular water. 25 ml of m-water weighs .07 grams less than an equal amount of regular tap water. Despite this lighter weight, we speculate that the m-water may have greater mass than tap water and that the lighter weight may be attributable to magnetic levitation on the earth’s magnetic field or some other phenomena. We cannot measure this with our existing equipment. Others have made similar measurements and have not confirmed these results. This may be due to problems with my measurement technique or differences in the source water for the trap.

# It is more viscous and slipperier than water: The m-water comes out of the ML trap through a quarter inch inside diameter vinyl tube. It does not flow through the tube like water should but rather seems to have about the consistency of light oil or glycerin. (Some of the water above some of my samples made from pure metallic gold seems to have “gelled”. These are in small test tubes and I can tip them completely on their sides and the “water” line inside barely tilts.) This m-water has a slightly slippery feel which increases with concentration of the m-state materials within.

# It is hydrophobic : The magnetically energized m-water looks like water but seems to have some hydrophobic properties. It dries very quickly on your hands. I believe that it also evaporates very quickly when it is concentrated in one place. (This should be a measurable phenomenon and I intend to measure it as soon as I get some of this damn stuff out of my system.) However it also seems to resist evaporation in some circumstances.

# It goes to gas easily: When the m-state elements in ML trap water are precipitated according to the wet method described in the ORMUS document ( http://www.lyghtforce.com/WhiteGold/ormus3.htm ) bubbles will form inside the precipitate for several days after it is precipitated. My colleague believes that these bubbles are magnetically stimulated m-state gas which is trying to get out of the water. He claims that this m-state material is hydrophobic and will leave water as soon as it has somewhere better to go. These bubbles become more common when a magnet is moved under a sample.

These bubbles do not seem to rise to the surface of the liquid as rapidly as air bubbles. When they rise to the surface and enter the atmosphere they will escape from a container around the edges of a loose lid. When this happens this gas is visible in the following way. It looks like a heat shimmer from the pavement or like the shimmer you see above the hose nozzle when you are filling up your car with gasoline. The gasoline analogy is more apt since it goes horizontally and down instead of up.

# It might be distilled by cooling: This researcher claims that refrigerating the ML trap water will actually cause it to go to vapor faster. This is just the opposite of normal materials. He thinks that different m-state materials might gas off as the temperature is lowered and that this will enable us to fractionate the m-state materials as they are distilled off. This has not been tested yet.

# It seems to be concentrated by fractional freezing: Another researcher claims that she started by partially freezing several gallons of water. When about half of the water was frozen she broke the ice and poured the unfrozen portion into another container where it was partially frozen again. She continued to repeat this till she got a portion which would not freeze at the temperatures which were available to her.

I have also done this starting with a thirty gallon barrel of water on a cold winter night. I repeated this process till I got down to two quarts of water but this water still froze outside at night. I still have this bottle of water in my refrigerator after about three years. The inside bottom of the bottle appears to be coated with a white precipitate which also clings to the sides of the bottom up about an inch. This coating is not very thick but looks a bit like the residue left when hard water evaporates.

# It appears to “tunnel” out of sealed containers: I have observed this phenomena three or four times, my colleague has observed it many times. The most active portion of these materials, when they have been magnetically stimulated, will easily pass through the walls of most sealed plastic or glass containers. Often they will have just enough energy to escape the container and then will “condense” as drops of liquid on the side of the container furthest from magnetic stimulation. This liquid has an oilier feel than water and has a pleasant sweet taste.

# M-state concentrate “evaporates” when vacuum is released : One researcher has reported that as a vacuum is pulled on the m-state concentrate from ML traps, the water associated with it will boil off leaving a gelatinous substance. As the vacuum is released this substance evaporates. I know of no other material which behaves in this way.

# Superfluid behavior : A couple of researchers have reported that under certain conditions these elements in water will not stay in an open container, but will “flow” up and out of the container. I am fairly certain that I have observed this myself.

# Flows toward nearest living thing: One researcher has reported that a puddle of water left after ozonation of water which probably contained ORMUS moved across the floor toward the nearest person. This phenomena has not been confirmed or replicated by anyone else.

# Oil of the metals: Jerel’s method – Daniel’s method – Magnetic trap – Dew

# It appears to multiply by itself: A couple of days ago a friend called to tell me that he had noticed that the m-state precipitate in the bottom of a vial filled mostly with distilled water had increased by “ten or twenty fold”. Various other researchers have occasionally seen the same phenomenon but no one seems to have precisely nailed it down. The interesting thing about my friend’s sample is that I have its twin at my house and my sample has not increased. We have considered the differences in these samples and how they are stored and we suspect that the unknown factor may be that his sample was stored in a double mu metal shielded container and mine was not.

Our hypothesis is that the m-state elements enter and leave this space-time all the time. They are more likely to leave if they are more energized. Fluctuating magnetic fields energize them. Better magnetic shielding allows more to stay around than leave.

# It seems to “like” tight spaces: The m-state water seems to be more comfortable in tight spaces. Tightly packed polyethylene fibers seem to improve our ability to collect and store these liquid concentrates. We hypothesize that tight spaces stabilize these elements in relation to magnetic fields and this allows them to be less energetic.

# The weight of the m-state increases as it is turned to metal: Various researchers have reported that the weight of the m-state elements will almost double as they are converted to metal. My colleague has demonstrated this process on a scale where the weight of the material literally increased before our eyes.

# Rotation preference: Another researcher, with whom I have not worked as closely, has described an interesting phenomenon with the m-state iridium. He claims that if you take m-state iridium precipitate and evaporate the water out till it is about the consistency of automotive grease, it will exhibit a distinct preference for being stirred in one direction rather than another. He says that when stirred in a clockwise direction it moves quite easily but when stirred in the opposite direction seems like you are lifting the entire mass of the material hanging from a string tied round the axis of rotation.

# M-state solids:
# Hyper-hydrophobia: One researcher and his partner have reported that at a certain energy level the dry m-state powder cannot be wetted with water. They claim that this effect is so profound that they can pour water into a beaker with this material in a pile in the center and the water will literally form a cylinder up the wall of the beaker without going over the pile of m-state in the center of the beaker.

# Levitation effects: Hudson has reported levitation effects in these materials under carefully controlled conditions. My colleague has seen them in less controlled situations. When he dried m-state materials from one source, he could not collect it because whenever he came near to it, it would “fly” away. He finally figured out a way to contain it and dry it in the container so then he had a mason jar containing a material which would “fly” to the side away from anyone who approached it.

# Levitation disks: Another researcher claims that if you take pure m-state iridium and leave it set for a few months, it will convert to metallic iridium. If you divide it up so that it is not so concentrated it is much more stable. He says that if you mix it with ceramic clay at a ratio of about nine parts clay to one part m-iridium you can make a ceramic disk which will levitate and exhibit other unusual properties.

The gentleman who claims that he has built the m-iridium/ceramic disks said that if they were annealed properly they would levitate by themselves, otherwise they had to be spun to levitate. He also mentioned that if you spin two of them face to face 30 or 40 mm apart that you can swing a pendulum between them and it will stop when it gets dead center between them. When you turn the motors off, which are spinning the disks, the pendulum will resume its swing with the same momentum that it had before it stopped. He speculates that the spinning disks somehow stop time in the space between them. Another researcher has attempted to replicate these results with m-iridium without success.

# Gone in a flash of light: Hudson and a couple of other researchers report that m-state rhodium precipitate if dried out in sunlight will disappear in a flash of light. The rhodium must comprise a significant but unquantified portion of the total amount of precipitate. This flash of light does not necessarily involve an explosion or implosion, just a release of radiation.

# M-state Iridium Disappears: Hudson reports that m-state iridium looses all weight an disappears from view when heated to around 830 degrees Celsius after repeated heating and cooling cycles.

# M-state gases or vapors

# These also seem to “like” tight spaces.

# Sublimates in air: One ORMUS researcher claims that the powdered m-state elements sublimate in air at the following temperatures:
Element ORME : Magnesium ? || Calcium ? || Cobalt ? || Nickel ? || Copper ? || Ruthenium ? || Rhodium 900 C or 1066 C || Palladium Over 2700 C || Silver 1800 C || Rhenium ? || Osmium ? ||Iridium 5400 C || Platinum ? || Gold 425 C || Mercury ? ||

# There is some evidence that, at least, some of them will sinter into a glass at temperatures higher than their sublimation points in air if they are heated in an inert gas. For example, Hudson reports that m-state gold sublimates at 425 degrees Celsius while it can be sintered into a glass at 1160 degrees Celsius.

# See also Chart Comparing Various Observers on the original page.

(to link the article above use: #PR1)